Hitachi DZ-MV780A Manual Do Utilizador

Página de 190
English
165
There was no scene 
which can be deleted.
This message will appear if you try to delete multiple scenes on 
Disc Navigation when all the selected scenes have been locked. 
Release the lock on scenes before executing deletion.
110, 118
This card cannot be 
used.
Please replace card.
The card cannot be used in this DVD video camera/recorder: Use 
another card.
27
This disc cannot be 
used. Please replace 
disc.
A disc that cannot be used on this DVD video camera/recorder 
has been loaded. Check the type of disc.
25
This disc is recorded by 
the PAL system. Please 
replace disc.
This DVD video camera/recorder can use only discs recorded on 
the NTSC system. A disc recorded on the PAL system cannot be 
used on this DVD video camera/recorder.
Top scene cannot be 
divided.
Division is not possible at the start of scene.
112
UNFORMAT DISC
The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc on this DVD 
video camera/recorder before using it.
Reinitializing even a disc used on this DVD video camera/
recorder may be necessary (initializing will erase all recorded 
contents on disc). If this message appears, try to initialize the 
disc. If the same message still appears, the disc may be 
damaged: Use another disc.
132
See *2 on page 166.
26
Use AC adapter/
charger.
Finalization is not possible when the DVD video camera/recorder 
is powered by a battery: Use the AC adapter/charger for 
finalization.
43, 135
Use AC adapter/
charger.
Turn off power.
Scene cannot be repaired when the DVD video camera/recorder 
is powered by a battery.
If the AC adapter/charger is unavailable in handy place, remove 
the disc, use the opposite side, or use another disc. To repair the 
removed disc, insert the disc into the DVD video camera/recorder 
afterwards, and connect the AC adapter/charger.
43
VIDEO scene cannot be 
copied to card.
No movie can be copied to card.
Select stills and copy them to card.
117
Write protected.
Check card.
A card with the erase prevention switch locked is inserted: Unlock 
the switch.
27
Write protected.
Check disc.
• A write-protected disc is inserted.
• Release the write-protect using the Disc Navigation menu.
133
Message
Cause & Troubleshooting
Reference 
page