Everpure 2001 Manual Do Utilizador

Página de 60
SUPREMA 2001 - OPERATION & SERVICE MANUAL
 
Page 6 of 60 
July 6, 2001 
Suprema 2001 - Operation & Service 
 
REMOVING SHIPPING MATERIALS 
 
2.  Lift and place the coffee maker onto your workbench. 
 
WARNING:
 
Never lift the machine by placing your hand underneath the front door. It is 
not designed to support the weight of the machine, and serious personal 
injury and/or damage to the unit may occur.
 
 
3.  Open the outer and inner doors. 
 
a)  There are two sets of keys attached to an envelope on the service cord. 
The keys numbered 8625 are for the outer door. The keys numbered 8645 
are for the inner door. 
 
4.  Remove all the shipping tape. 
 
a)  Shipping tape is found in the following areas: Valve cover, Service cord, 
Brewer spout, Cup Trays. 
 
WARNING:
 
Do not connect the service cord to the wall outlet at this point as more 
adjustments are still required to the machine.
 
 
 
CONNECTIONS AND ADJUSTMENTS 
When the water tank is drained after testing at the factory, it is possible for the element 
may remain hot for a short while afterwards and trigger the thermal cut-off switch.  
 
5.  Reset the thermal cut-off switch. 
a)  Remove the valve cover (figure 1) on 
the front of the hot water tank. 
b)  Remove the plastic wing-nut securing 
the water tank access panel to the top 
of the machine. 
c)  Remove the water tank access panel. 
d)  Press the “reset” button on the 
thermal cut-off switch (figure 2). 
 
6.  Re-install the water tank access panel, 
and the valve cover. 
 
Figure 1 - Remove valve cover. 
Figure 2 - Reset the thermal cut-off switch.