Country Home Products ELECTRIC WOOD SPLITTER Manual Do Utilizador
CALL
TOLL
FREE
1-800-DR-OWNER 15
Splitting Safety
The DR 6 -TON ELECTRIC WOOD SPLITTER has a Ram with 6 tons of force.
•
ALWAYS BE SURE TO STAND INSIDE THE OPERATOR ZONE TO RUN
THE WOOD SPLITTER (
THE WOOD SPLITTER (
FIGURE 5). THIS IS THE AREA DIRECTLY
BEHIND YOUR DR 6 -TON ELECTRIC WOOD SPLITTER. NEVER
OPERATE THE WOOD SPLITTER FROM ANYPLACE ELSE.
OPERATE THE WOOD SPLITTER FROM ANYPLACE ELSE.
•
HANDLE LOGS ONLY FROM THE SIDES, NEVER BY THE ENDS.
•
FOR BEST SPLITTING RESULTS, PLACE LOG FLAT ON THE BEAM
BETWEEN THE LOG GUIDES (
BETWEEN THE LOG GUIDES (
FIGURE 5) WITH BUTT END TOWARD
HYDRAULIC CYLINDER RAM.
•
NEVER ATTEMPT TO SPLIT A LOG AT AN ANGLE AND BE SURE THE
WEDGE AND RAM WILL CONTACT THE LOG SQUARELY ON THE
ENDS.
WEDGE AND RAM WILL CONTACT THE LOG SQUARELY ON THE
ENDS.
•
BE VERY CAREFUL TO KEEP ARMS AND FINGERS AWAY FROM THE WEDGE AND RAM.
•
KEEP HANDS AND FINGERS CLEAR AT ALL TIMES. MANY WOOD SPLITTING ACCIDENTS HAPPEN ON
THE RETURN PORTION OF THE STROKE.
THE RETURN PORTION OF THE STROKE.
•
DO NOT PUT ANY PART OF YOUR BODY WITHIN THE SPLITTING AREA. USE A STICK IF YOU NEED TO
REMOVE DEBRIS FROM THE SPLITTING AREA (
REMOVE DEBRIS FROM THE SPLITTING AREA (
FIGURE 6).
Operator Zone
Log
Guides
Guides
Figure 5
Wedge
Splitting Area
Log Guides
Operator Zone
Ram
Figure 6