Fujitsu CONNECT2AIR AP-600RP-USB Manual Do Utilizador
Inform WLAN AP-600RP-USB Configuration schemes Issue October 16
th
2003
Page 5 of 6
6.
AP-600RP-USB with CABLE Modem
( 1 ) Cable Modem
( 2 ) AP-600RP-USB
( 3 ) Notebook
The Cable Modem does not have
to be configured.
to be configured.
WAN:
dynamic IP address
LAN:
static IP: 192.168.1.254
DHCP
on: 192.168.1.10 - 90
GW:
192.168.1.254
DNS:
auto
Routing: on (cable from Modem
connected to the WAN
interface)
SSID: CONNECT2AIR
SSID: CONNECT2AIR
TCP/IP:
get IP and DNS
address
automatically
SSID: CONNECT2AIR
Data Rate: auto
SSID: CONNECT2AIR
Data Rate: auto
Connecting the devices to the AP-600RP-USB:
Connect the CABLE Modem to the WAN port. Additional networking devices like network printers, servers or scanners
can be plugged to one of the free LAN ports and will be integrated in the IP segment of 192.168.1.X.
can be plugged to one of the free LAN ports and will be integrated in the IP segment of 192.168.1.X.
Installation Note
Beside ADSL, most broadband Internet connections are nowadays established over CABLE Modem (TV cabling). This
case describes using an CABLE modem in connection to the WLAN AccessPoint. The configuration is quite easy and
allows you to share one single Internet connection with several other Clients.
CABLE Modem:
- establishing Internet connection
AP-600RP-USB:
- DHCP Server
- handling the wireless LAN (WLAN) access
- NAT Routing, Firewall are active
- DHCP Server
- handling the wireless LAN (WLAN) access
- NAT Routing, Firewall are active
4
1
2
1
3
4
3