Axxess Interface Whiteboard Accessories 8690 Manual Do Utilizador

Axxess

® 

Model 8690 User Guide – ITP Mode

Lift the handset and press 

. A call is automatically placed to the endpoint or

message center that left the message. (See 

 for information about accessing

your mailbox.)

1.

With the handset in the cradle, press the 

 menu button to view

the waiting message. If more than one message is waiting, scroll to the desired
message using the 

 or 

 menu buttons or press the high (up

arrow) or

 

low (down arrow) end of the 

 button.

2.

Press the 

 menu button to respond to the desired message.

1.

Press 

 or the 

 menu button to view the message to be

canceled.

2.

Press  

or 

the 

 menu button to cancel the displayed message.

With an electret headset, you can talk on the endpoint handsfree, without using your
speaker and microphone.

If your headset has a power-saver mode, make sure the system administrator

has the Headset Connect Tone flag enabled in the telephone system. If this flag is not
enabled, you may miss the first few seconds of incoming calls.

1.

Insert the headset plug into the headset jack.

2.

With the handset in the cradle, dial 

 (Headset On feature code) or

dial 

 (Headset On/Off feature code). The display shows HEADSET

MODE ON.

If using a headset, press Speaker to connect and disconnect calls.

1.

Unplug the headset cord from the headset jack.

2.

With the handset in the cradle, dial 

 (Headset Off feature code) or

dial 

 (Headset On/Off feature code). The display shows HEADSET

MODE OFF.

If you have both a headset and a handset connected to your endpoint and you

are using the headset, you can quickly transfer audio to the handset by lifting the hand-
set from the cradle. Press Speaker to transfer the call back to the headset before
replacing the handset in the cradle.