Husqvarna DXR-310 Manual Do Utilizador

1. Right and left button on right joystick

2. Right and left button on left joystick

3. Direction joystick

4. Left and right joystick respectively 

1. Arm 1

2. Arm 2

3. Arm 3

4. Tool

5. Outrigger

6. Caterpillar tracks

7. Tower

The machine can be operated in three different 
modes: transport mode, set-up mode and work mode. 
All commands in each of the modes are described in 
this section. 

•  Work mode - In this mode you can operate every-

thing except the caterpillar tracks and outriggers.

•  Set-up mode - In this mode you can operate the 

caterpillar tracks and outriggers.

•  Transport mode - In this mode you can operate the 

caterpillar tracks and some arm functions.

If no controls have been used for three seconds the 
machine goes into idling mode. In this mode hydraulic 
oil is pumped into the tank and there is no pressure in 
the cylinders. 

External hydraulic tools can be connected to the ma-
chine. The mode is activated by pressing the button 
for external tools. In this mode the machine cannot be 
operated from the remote control.

IMPORTANT!

To be driven in the emergency operation mode 
the machine must be fi tted with hand levers.

Emergency operation is used in conjunction with 
terminal or control system problems. The mode is 
activated by putting the knob into the position for 
emergency operation.

When emergency operation is activated the machine 
turns off and has to be restarted using the start button 
on the machine. In this mode the machine can only be 
moved using emergency operation, other functions are 
disconnected. When emergency operation is deacti-
vated the machine turns off and has to be restarted 
using the remote control.

26

 - English