BMW 2009 M5 Sedan Manual Do Proprietário
Replacing components
222
Replacing components
Onboard toolkit
The onboard toolkit is located in the luggage
compartment lid.
Loosen the wing nut to open.
compartment lid.
Loosen the wing nut to open.
Wiper blade replacement
1.
Fold the wiper arm out and grasp firmly.
2.
Press the safety tabs together while sliding
the wiper blade toward the front to disen-
gage it.
the wiper blade toward the front to disen-
gage it.
3.
Mount the new wiper blade and slide in until
it is heard to engage.
it is heard to engage.
Lamps and bulbs
Lamps and bulbs make an essential contribu-
tion to vehicle safety. You must be duly diligent
in replacing them. BMW recommends having
your BMW center perform any work that you do
not feel competent to perform yourself or that is
not described here.
tion to vehicle safety. You must be duly diligent
in replacing them. BMW recommends having
your BMW center perform any work that you do
not feel competent to perform yourself or that is
not described here.
Never touch the glass of new bulbs with
your bare fingers, as even minute
your bare fingers, as even minute
amounts of contamination will burn into the
bulb's surface and reduce its service life. Use a
clean cloth, napkin, etc., or hold the bulb by its
metal socket.
bulb's surface and reduce its service life. Use a
clean cloth, napkin, etc., or hold the bulb by its
metal socket.
<
A selection of replacement bulbs is available at
your BMW center.
your BMW center.
Only replace bulbs when cool, as other-
wise you may be burned.
wise you may be burned.
<
Whenever you perform any work on the
electrical system, turn off the systems/
electrical system, turn off the systems/
consumers involved to prevent short circuits
from occurring. To avoid possible injury or
equipment damage when replacing bulbs,
observe any instructions provided by the bulb
manufacturer.
from occurring. To avoid possible injury or
equipment damage when replacing bulbs,
observe any instructions provided by the bulb
manufacturer.
<
For information on how to care for the head-
lamps, please follow the instructions on
page
lamps, please follow the instructions on
page
For bulbs for which changing is not
described, and for checking and adjusting
described, and for checking and adjusting
headlamp aim, please contact your BMW cen-
ter.
ter.
<
Light-emitting diodes LEDs
Light-emitting diodes installed behind translu-
cent lenses serve as the light source for many of
the controls and displays in your vehicle. These
light-emitting diodes, which operate using a
concept similar to that applied in conventional
lasers, are officially designated as Class 1 light-
emitting diodes.
cent lenses serve as the light source for many of
the controls and displays in your vehicle. These
light-emitting diodes, which operate using a
concept similar to that applied in conventional
lasers, are officially designated as Class 1 light-
emitting diodes.
Do not remove the covers, and never
stare into the unfiltered light for several
stare into the unfiltered light for several
hours, as irritation of the retina could result.
<
Xenon lamps
The service life of these bulbs is very long and
the probability of a failure is very low, provided
that they are not switched on and off an unusual
number of times.
the probability of a failure is very low, provided
that they are not switched on and off an unusual
number of times.
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG