BMW 2009 M5 Sedan Manual Do Proprietário

 223

Have work on the xenon lighting system 
performed only by your BMW center or a 

workshop that works according to BMW repair 
procedures with correspondingly trained per-
sonnel. Due to the high voltage present in the 
system, there is a danger of fatal injuries when 
work is carried out improperly.

<

The illustration shows the left-hand side of the 
engine compartment.

1 Cover cap for parking and roadside parking 

lamps, daytime running lamps

2 Sealing cap for turning lamps

To remove the covers:

>

Parking lamps and roadside parking lamps, 
daytime running lamps: turn the cover cap 
to the left and remove.

>

Turning lamps: turn the sealing cap to the 
left and remove.

H8 bulb, 35 watts

1.

Turn the bulb in the direction of the arrow, in 
the opposite direction on the other side, 
and remove.

2.

Remove the connector and replace the 
bulb.

H3 bulb, 55 watts

1.

Remove the sealing cap, refer to Access to 
lamps.

2.

Push the locking bar to the side out of the 
anchor and fold upward.

3.

Remove the connector and take out the 
bulb.

4.

Replace the bulb and reinstall.

5.

Fold down the locking bar and engage it.

6.

Reconnect the connector.

7.

Mount the sealing cap. Watch the markings 
on the bulb when doing so.

Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG