BMW 2006 Z4 3.0i Roadster Manual Do Proprietário

 37

To gain access to this anchor fitting, lift the 
plastic plug with the help of a screwdriver, see 
arrow.

Use the tether strap anchor fittings only 
to fasten child-restraint systems in place; 

otherwise the anchor fittings could be dam-
aged.

<

1.

Unhook the roller-blind cover, if necessary, 
and let it retract.

2.

Push the head restraint upward.

3.

Guide the tether strap through the head 
restraint support posts.

4.

Push the head restraint into its lowest posi-
tion.

5.

Clip the tether strap onto the anchor fitting.

1.

Unhook the roller-blind cover, if necessary, 
and let it retract.

2.

Guide the tether strap through the holder at 
the top of the head restraint.

3.

Clip the tether strap onto the anchor fitting.

LATCH: Lower Anchor and Tethers for CHil-
dren.

When installing a LATCH child seat, com-
ply with the child seat manufacturer's 

operating and safety instructions.

<

The anchor points for the LATCH child seat can 
be found at the locations marked by the arrows.
Carefully push the child seat brackets through 
the gap between the seat cushion and backrest 
cushion at the designated locations, see 
arrows.

 Online Edition for Part-No. 01 41 0 012 083 - © 04/06 BMW AG