BMW 2004 645Ci Convertible Manual Do Proprietário

Página de 216
 75
Technology for comfort, convenience 
and safety 
PDC Park Distance Control* 
The concept 
The PDC assists you when you are parking. 
Signal tones and a visual display
*
 indicate 
the current distance to an object behind or 
in front of your vehicle. To measure the dis-
tance, there are four ultrasonic sensors in 
each bumper. The sensors at the front and 
at the two rear corners have a range of 
approx. 20 in/50 cm; the rear middle sen-
sors have approx. 5 ft/1.50 m.
PDC is a parking aid that can indicate 
objects when they are approached 
slowly, as is usually the case when parking. 
Avoid approaching an object at high speed, 
as otherwise the physical circumstances 
would mean that the system warning was 
too late.
<
Automatic mode 
In ignition key position 2, the system auto-
matically assumes operational status after 
a few seconds each time you engage 
reverse gear or selector-lever position R.
Wait this short period before driving.
<
The system is automatically deacti-
vated once the vehicle travels approx. 
165 ft/50 m or exceeds a speed of roughly 
20 mph/30 km/h; the indicator lamp goes 
out. You can reactivate the system manu-
ally as needed.
Manual mode 
With the ignition key in position  2, press the 
button; the indicator lamp lights up.
Deactivating manual mode 
Press the button again; the indicator lamp 
goes out.
Signal tones 
The signal indicating the distance to the 
nearest obstacle is directional. Thus, an 
object detected to the left rear of the vehi-
cle will be indicated by a signal tone from 
the left rear speaker, etc.  As the distance 
between vehicle and object decreases, the 
intervals between the tones become 
shorter. The signal tone becomes continu-
ous once the distance to the nearest object 
falls to below roughly 1 ft/30 cm.
The warning signal is canceled after 
approx. 3 seconds if you are moving paral-
lel to a wall.
Malfunctions 
The indicator lamp within the button 
flashes and a message appears on the 
Control Display. PDC has failed. Switch off 
PDC. Have the system checked.
As a preventive measure, keep the sensors 
clean and free of ice or snow in order to 
ensure that they will continue to operate 
effectively.
PDC with visual warning*
You also enjoy the option of having the sys-
tem show distances to objects on the Con-
trol Display. The Control Display will also 
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG