BMW 2004 645Ci Convertible Manual Do Proprietário
Technology for comfort, convenience and safety
76
indicate the presence of objects in green
before they are close enough to generate a
signal tone.
before they are close enough to generate a
signal tone.
1.
Press button.
The start menu is opened
2.
Press the controller to open the menu
3.
Select "Vehicle settings" and press the
controller
controller
4.
Select "PDC" and press the controller
5.
Select "Monitor display on" and press
the controller.
the controller.
The PDC screen is activated.
The display appears on the Control Display
as soon as PDC is activated.
as soon as PDC is activated.
Depending on which key you have used to
open the vehicle, the last adjustment is
applied.
open the vehicle, the last adjustment is
applied.
System limits
Even with PDC, final responsibility for
estimating the distance between the
estimating the distance between the
vehicle and any obstructions always
remains with the driver. Even when sensors
are involved, there is a blind spot in which
remains with the driver. Even when sensors
are involved, there is a blind spot in which
objects cannot be detected. The system is
also subject to the physical limits that apply
to all forms of ultrasonic measurement,
such as those encountered with thin and
wedge-shaped objects, etc. Low objects
already displayed, e.g. a curb, can also dis-
appear from the detection area of the sen-
sors again before a continuous tone
sounds.
Loud noises from outside and inside your
vehicle may prevent you from hearing the
PDC signal tone.
also subject to the physical limits that apply
to all forms of ultrasonic measurement,
such as those encountered with thin and
wedge-shaped objects, etc. Low objects
already displayed, e.g. a curb, can also dis-
appear from the detection area of the sen-
sors again before a continuous tone
sounds.
Loud noises from outside and inside your
vehicle may prevent you from hearing the
PDC signal tone.
<
Do not apply high pressure spray to
the sensors for a prolonged period of
the sensors for a prolonged period of
time. Keep the spray at least 4 in/10 cm
away from the sensors.
away from the sensors.
<
Driving stability control
systems
systems
Your BMW is equipped with an extended
array of systems designed to enhance and
maintain vehicle stability under extreme
conditions. The following section describes
these functions based on ABS and DSC.
array of systems designed to enhance and
maintain vehicle stability under extreme
conditions. The following section describes
these functions based on ABS and DSC.
ABS Antilock Brake System
ABS enhances active safety by preventing
the wheels from locking under braking.
the wheels from locking under braking.
ABS is operational every time you start the
engine. ABS includes the functions CBC
Cornering Brake Control and EBV Elec-
tronic brake-force distribution.
engine. ABS includes the functions CBC
Cornering Brake Control and EBV Elec-
tronic brake-force distribution.
CBC Cornering Brake Control
It provides further enhancements in vehicle
stability and steering response during lane
changes and cornering at high rates of lat-
eral acceleration.
stability and steering response during lane
changes and cornering at high rates of lat-
eral acceleration.
EBV Electronic brake-force
distribution
distribution
EBV controls the brake system's applica-
tion pressure at the rear wheels to ensure
stable deceleration.
tion pressure at the rear wheels to ensure
stable deceleration.
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG