BMW Automobile 01 41 0 158 515 Manual Do Proprietário

49

The rear head restraints may only 
be lowered if there are no passen-

gers in the rear seats. If you do so, you 
are in violation of the law. Raise the rear 
head restraints before taking on any 
passengers in the back.

<

To completely lower the rear head 
restraints:

1. Press the button and hold it down
2. Push the head restraint down from 

above.

Raise the head restraints until you hear 
them click into place.

Do not remove the rear head 
restraints as this would damage 

them.

<

For further information, please consult 
your BMW center.

Do not use the rear head 
restraints as storage shelves. 

Always keep the travel path for the roll-
over protection system free and clear. 
Under no circumstances should you put 
any kind of cover such as an antima-
cassar on the head restraints, refer also 
to the labeling on the head restraints.

<

The seat-integrated safety belt system 
allows for easy access to the rear.

1. Lift lever 1 up and tilt the backrest 

forward until it engages

2. Press and hold button 2 in driving 

direction until the seat moves to the 
desired position

3. After entering the rear, fold back and 

lock the backrest

4. Press button 2 opposite the direction 

of travel and hold. The seat moves 
back into its previous position. If the 
button 2 is released beforehand, the 
seat stops in the respective position.

Online Edition for Part-No. 01 41 0 158 515 - © 09/04 BMW AG