BMW Automobile 01 41 0 158 515 Manual Do Proprietário
50
The seat can be locked into posi-
tion when it is tilted forward. This
tion when it is tilted forward. This
is particularly convenient when entering
the vehicle on an incline, for example.
Press against the backrest until you
hear it snap into place. Lever 1 does
not have to be released to fold the seat
back.
the vehicle on an incline, for example.
Press against the backrest until you
hear it snap into place. Lever 1 does
not have to be released to fold the seat
back.
<
Lock both backrests while driving,
otherwise there is a danger of an
otherwise there is a danger of an
unexpected movement causing an
accident.
accident.
<
The indicator lamp in the instru-
ment cluster flashes when the
backrest is not locked, refer to
ment cluster flashes when the
backrest is not locked, refer to
Safety belts
Always wear your safety belt
Always fasten your safety belt before
starting off. As supplemental restraint
devices, the airbags are designed to
enhance the effectiveness of the safety
belts, and not to replace them.
starting off. As supplemental restraint
devices, the airbags are designed to
enhance the effectiveness of the safety
belts, and not to replace them.
Before putting your safety belts on
in the rear, take them out of the
in the rear, take them out of the
holder.
<
Leave the rear safety belts in the
holders if they are not needed, in
holders if they are not needed, in
order to avoid unwanted movement
from the safety belts at high speeds.
from the safety belts at high speeds.
<
To close
Make sure you hear the lock engage in
the belt buckle.
the belt buckle.
To release
1. Press the red button in the belt
buckle
2. Hold the belt
3. Guide the belt back into its reel.
3. Guide the belt back into its reel.
Safety belt height
The front safety belt automatically
adapts to your body size via the setting
of the head restraint height, refer to
page
adapts to your body size via the setting
of the head restraint height, refer to
page
.
If the safety belt system has been
subjected to the stresses involved
subjected to the stresses involved
in an accident or otherwise damaged:
have the entire safety belt mechanism
replaced by your BMW center, includ-
ing the safety belt tensioner. In addi-
tion, have your BMW center inspect the
safety belt anchors. If a child-restraint
system was in the vehicle during an
accident, consult the manufacturer's
instructions regarding replacement.
have the entire safety belt mechanism
replaced by your BMW center, includ-
ing the safety belt tensioner. In addi-
tion, have your BMW center inspect the
safety belt anchors. If a child-restraint
system was in the vehicle during an
accident, consult the manufacturer's
instructions regarding replacement.
<
Entering the rear
Online Edition for Part-No. 01 41 0 158 515 - © 09/04 BMW AG