BMW 745LI Manual Do Utilizador

Página de 229
Driving
70
To obtain maximum acceleration, for 
passing maneuvers, etc., during 
operation in the manual mode, use the 
kickdown or downshift manually.
<
 
Malfunctions 
A status report will appear in the Check 
Control to alert you to any malfunctions in 
the transmission-control system. Please 
note any supplementary information that 
appears in the Control Display. The direc-
tional arrows also start to flash in the Info 
Display. 
While it will remain still possible to move 
the selector lever to any desired position, 
the transmission will revert to operation in 
its default mode with only a limited number 
of forward gears. 
Some types of malfunction will make it 
impossible to engage all gears. 
The engine may respond with reduced 
output when accelerating from a standing 
start. 
If this happens, avoid extreme engine loads 
and consult the nearest BMW center. 
If no status messages appear in the 
Info Display you should accelerate 
carefully to confirm that you are driving in 
the desired direction. 
Never work in the engine compartment 
with any of the forward or reverse gears 
engaged, as the vehicle could start to 
move. Engage the parking brake, refer to 
page 
<
 
Releasing transmission lockout 
manually
You can respond to any interruptions in the 
supply of electrical power, for instance, if 
the battery is discharged or disconnected, 
by releasing the transmission lockout man-
ually. 
To prevent the drive wheels from 
locking up and sliding, the transmis-
sion lockout must always be released man-
ually before the vehicle is towed.
<
 
Press the brake pedal before 
releasing the transmission lockout 
manually. If the brakes are not applied, the 
vehicle could start to roll if parked on a 
steep slope. 
The transmission lockout should only be 
released for towing. Remember to engage 
the transmission lockout when you repark 
the vehicle after moving it. 
Should it also be necessary to release the 
parking brake manually, owing to a dis-
charged battery, etc., always adhere to the 
following sequence: 
1.
Start by manually releasing the parking 
brake, refer to page 
2.
Then proceed to manually release the 
transmission lockout.
<
 
Jump-starting and towing, refer to 
pages 
Releasing 
1.
Use the vehicle key to release the cover 
panel beneath the instrument panel by 
turning the lock counterclockwise, then 
fold down the cover
2.
Use the strap 1 to pull out the release 
lever, continuing until it snaps into 
Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG