BMW 745i Manual Do Proprietário
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Reference
115
The device can be operated as of ignition
on.
on.
If the device can not be operated after
repeated programming, check
repeated programming, check
whether the original hand-held transmitter
uses an alternating-code system. To do so,
either read the instructions of the original
hand-held transmitter or press and hold
down the programmed memory key 1 of
the integrated universal remote control. If
the indicator lamp 2 on the integrated uni-
versal remote control flashes quickly for a
brief period and then remains lit up for
approx. two seconds, this indicates that
the original hand-held transmitter is
equipped with an alternating code. In the
case of an alternating-code system, pro-
gram the memory keys 1 as described at
the section on alternating-code transmit-
ters.
uses an alternating-code system. To do so,
either read the instructions of the original
hand-held transmitter or press and hold
down the programmed memory key 1 of
the integrated universal remote control. If
the indicator lamp 2 on the integrated uni-
versal remote control flashes quickly for a
brief period and then remains lit up for
approx. two seconds, this indicates that
the original hand-held transmitter is
equipped with an alternating code. In the
case of an alternating-code system, pro-
gram the memory keys 1 as described at
the section on alternating-code transmit-
ters.
<
Alternating-code transmitters
Consult the operating instructions of the
unit you wish to set when programming the
integrated universal remote control. Find
out about the possibility for synchroniza-
tion.
When programming hand-held transmitters
that employ an alternating code, please
observe the following supplementary
instructions:
unit you wish to set when programming the
integrated universal remote control. Find
out about the possibility for synchroniza-
tion.
When programming hand-held transmitters
that employ an alternating code, please
observe the following supplementary
instructions:
Programming will be easier with the
aid of a second person.
aid of a second person.
<
1.
Park your vehicle within the range of the
remote-controlled device
remote-controlled device
2.
Program the integrated universal
remote control as described at the sec-
tion on fixed code hand-held transmit-
ters.
remote control as described at the sec-
tion on fixed code hand-held transmit-
ters.
3.
Localize the key on the receiver of the
device you want to set up, e.g. on the
upper section of the motor
device you want to set up, e.g. on the
upper section of the motor
4.
Press the key on the receiver of the
device you want to set up. After step 4,
approx. 30 seconds remain for step 5
device you want to set up. After step 4,
approx. 30 seconds remain for step 5
5.
Press the programmed memory key 1
on the integrated universal remote con-
trol three times.
on the integrated universal remote con-
trol three times.
The corresponding memory key 1 is now
programmed with the signal of the original
hand-held transmitter.
programmed with the signal of the original
hand-held transmitter.
If you have any additional questions,
please contact your BMW center.
please contact your BMW center.
<
Clearing memory keys
Individual memory keys 1 can not be
cleared. However, you clear all three
memory keys 1 together as follows:
cleared. However, you clear all three
memory keys 1 together as follows:
Press both outer keys 1 of the integrated
universal remote control for approx.
20 seconds, maintaining pressure until the
indicator lamp 2 starts to flash.
universal remote control for approx.
20 seconds, maintaining pressure until the
indicator lamp 2 starts to flash.
Sun blinds*
Rear window blind
Activate by briefly pressing the button in
the driver's door with the ignition lock in the
radio mode.
the driver's door with the ignition lock in the
radio mode.
Window blind for rear side windows
Activate by pressing the desired button
with the ignition lock in the radio mode.
with the ignition lock in the radio mode.
1
Quarter window blind
2
Side window blind
Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG