BMW 325XI Manual Do Utilizador

Dynamic Stability Control (DSC)*

The concept

DSC maintains vehicle stability, even in
critical driving situations.

The DSC is operational every time you
start the engine.

DSC incorporates the Dynamic Traction
Control (DTC) and Cornering Brake
Control (CBC) functions.

Additional information on DSC is found
in the "Technology" brochure.

Indicator lamp

The indicator lamp in the instru-
ment cluster goes out shortly
after the ignition has been

switched on; refer to page

> The indicator lamp flashes: DSC is

actively controlling drive torque and
braking intervention

> The indicator lamp stays lit: DSC has

been switched off with the button;
DTC and DBC are operational. DTC
control intervention is not indicated.

The indicator and the brake
warning lamps will remain on
continuously yellow:

The DSC, DTC and DBC have
been switched off manually or

there is a system malfunction.

The vehicle will remain completely
operational, however, without DSC. In
the event of a fault, please consult your
BMW center.

Indicator and warning lamps for
Canadian models.

Deactivating the DSC/activating
the DTC

Press the DSC button briefly; the indi-
cator lamp comes on and stays on.

DSC is deactivated; DTC is operational.

In the following rare situations, it may
prove useful to activate the DTC for a
brief period:
> When rocking the vehicle or starting

off in deep snow or on loose surfaces

> When driving on snow-covered

grades, in deep snow, or on a snow-
covered surface that has been
packed down from being driven on

> When driving with snow chains.