BMW 325XI Manual Do Utilizador

Dynamic Stability Control (DSC) – BMW 325xi, 330xi

The concept

DSC maintains vehicle stability, even in
critical driving situations.

The DSC is operational every time you
start the engine.

DSC includes the Automatic Differential
Brake (ADB-X) and Cornering Brake
Control (CBC) functions.

Additional information on DSC is found
in the "Technology" brochure.

Indicator lamp

The indicator lamp in the instru-
ment cluster goes out shortly
after the ignition has been

switched on; refer to page

> The indicator lamp flashes: DSC is

actively controlling drive torque and
braking intervention

> The indicator lamp stays lit: DSC has

been switched off with the button;
ADB-X is operational. ADB-X control
intervention is not indicated.

If the indicator lamp fails to go out
when you press the DSC button,

this indicates a malfunction in the DSC
and ADB-X systems; the system is
deactivated, and the stability enhance-
ment functions are no longer avail-
able.

The vehicle will remain completely
operational, however, without DSC. In
the event of a fault, please consult your
BMW center.

To deactivate DSC

Press the DSC button; the indicator
lamp comes on and stays on.

DSC is now off, and ADB-X reverts to
its maximum torque-transfer mode.

In the following exceptional circum-
stances, it may be effective to deacti-
vate the DSC for a short period:
> When rocking the vehicle or starting

off in deep snow or on loose surfaces

> When driving with snow chains.

To maintain vehicle stability,
always drive with the DSC acti-

vated whenever possible.