Bosch Appliances Home Security System DVR4C Manual Do Utilizador
Bosch Security Systems | Version 1.1
DVR4C Remote Viewer | Operation Manual | Configuration Tool
EN | 11
5
Configuration Tool
The Configuration Tool allows an administrator to
configure the DVRs connected to the network and their
associated cameras.
5.1
Registering a DVR
1. Click the
Add
button in the left bottom corner.
2. Enter a DVR Name for local use, a User name, and a
Password.
> The name can be up to 30 characters long.
> The default values of User name/Password are admin/
admin
.
3. Select either a Ethernet or dial-in connection for the
DVR you want to register.
> A phone number is required for a dial-in connection.
4. Enter an IP Address and a Port number or click
Auto-
detect
and select an IP address from the list.
5. Click
OK
.
5.2
Login and configuration
1. Select a DVR in the list of DVRs.
2. Enter the password and click
Login
.
> The Configuration Tool requires administrator rights to log
on to a DVR. The administrator ID is always admin. The
password is set in the
Connectivity
menu of the
DVR4C.
> If a DVR's configuration menu is activated or remote setup
is configured as Disable, login is blocked.
When you log in, nine tabs are shown:
•
Information
•
Camera
•
Recording
•
Event setup
•
Profiles
•
System settings
•
Connectivity
•
Disk manager
•
Security
Each of these tab pages allows you to configure different
functions of the selected DVR. When you change the value
of an item in any of the tabs, click the
Apply
button to
confirm the change. Click the
Cancel
button to discard
changes.
For more information on the settings that can be changed,
refer to the DVR4C Installation Manual.