Whirlpool GMC275PD Manual Do Utilizador

Press the “up” (

▲

) or “down” (

▼

) pad(s) until the

correct time shows on the display.

If you do not want the clock time displayed, press and
hold CLOCK for 5 seconds. To display the clock time
again, press and hold CLOCK for 5 seconds. You
should not have to reset the time.

8

The command pads tell the oven what to do and in
what order. Some command pads have an Indicator
Light. The Indicator Light comes on when you press
the command pad. The ON Indicator Light comes on
when you press START/ENTER for an oven function.

The control lock prevents unwanted use of the oven by
disabling most of the control panel command pads 
(except CLOCK, TIMER SET, TIMER OFF, and LIGHT).

Control lock is only available when oven is not in
use or control has not been set.

Set control lock when cleaning the control panel to
prevent oven from accidentally turning on.

Press and hold START/ENTER for 5 seconds. A single

tone will sound and “Loc” and 

will

appear on the temperature display. When
the control is locked, only the clock, timer,

and oven light will operate.

Press and hold START/ENTER for 5 seconds. A single

tone will sound and “Loc” and 

will 

disappear from the temperature display.

Audible signals tell you if a function is entered correctly
or not. They also tell you when a cycle is completed.

Press and hold STOP TIME for 5 seconds. A short

tone will sound to tell you the signals have
been changed. Repeat the above step to
turn the signals back on.

Press and hold DELAY START TIME for 5 seconds. A

short tone will sound to tell you the signals
have been changed. “Snd” and “HI” and
“Snd” and “LO” will appear on the time 
display to show the volume you chose. If the
volume is changed while the audible signals

are off, then signals are turned back on at the volume
setting chosen.

ENTER

CANCEL

CLOCK

ENTER