BMW 2008 M3 Convertible Manual Do Proprietário

Driving

Remove the remote control from the igni-
tion lock, refer to page

. This automati-

cally engages transmission position P.

Before driving into a car wash

The vehicle is able to roll when you perform the
following steps:

Insert the remote control, even with conve-
nient access, into the ignition lock.

Depress the brake.

Engage transmission position N.

Switch off the engine.

The vehicle can roll.
Transmission position P is engaged:

Automatically after approx. 30 minutes

When you remove the remote control from
the ignition lock

Parking brake

The parking brake is primarily intended to pre-
vent the vehicle from rolling while parked; it
brakes the rear wheels.

Indicator lamp

The indicator lamp is lit, and when you
drive off an acoustic signal sounds in
addition. The parking brake is still

applied.

Indicator lamp for Canadian models.

Applying

The lever locks in position automatically.

Releasing

Pull slightly upwards, press the button and
lower the lever.

In exceptional cases, if the parking brake
has to be used to slow or stop the car, do

not pull the lever up too hard. In doing so, con-
tinuously press the button of the parking brake
lever.
Otherwise, excessive force on the parking
brake can lock up the rear wheels and cause the
rear of the car to swerve.

To prevent corrosion and one-sided brak-
ing action, occasionally apply the parking

brake lightly when the vehicle is slowly coming
to a stop if the traffic conditions are suitable.
The brake lamps do not light up when the park-
ing brake is applied.

Manual transmission

When shifting into 5th or 6th gear, press
the gearshift lever to the right. Otherwise

the engine could be damaged if you inadvert-
ently shift into 3rd or 4th gear.