BMW 2006 M6 Coupe Manual Do Proprietário
41
3.
Press the
button:
The LED in the button lights up.
4.
Press the desired memory button
1, 2 or 3:
The LED goes out.
Requesting
Do not request a position from the mem-
ory while the vehicle is moving. There is a
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering wheel.
the seat or steering wheel.
<
Convenience mode
1.
Open the driver's door after unlocking or
switch on radio readiness, refer to page
switch on radio readiness, refer to page
.
2.
Briefly press the desired memory button
1,
2 or 3.
The system immediately cancels the adjust-
ment procedure when you briefly press one of
the seat adjustment switches or one of the
memory buttons.
The adjusting procedure for the steering wheel
is immediately interrupted if you briefly press
the switch for the steering wheel adjustment in
any direction, refer to page
ment procedure when you briefly press one of
the seat adjustment switches or one of the
memory buttons.
The adjusting procedure for the steering wheel
is immediately interrupted if you briefly press
the switch for the steering wheel adjustment in
any direction, refer to page
Safety feature
1.
Close the driver's door and switch ignition
on or off, refer to page
on or off, refer to page
2.
Press the desired memory button
1, 2 or 3
and maintain pressure until the adjustment
process has been completed.
process has been completed.
If the
button was pressed inadvertently:
press the button again; the LED goes out.
Activating with remote control
The last positions of the driver's seat, external
rearview mirrors, and steering wheel are stored
for the remote key currently in use.
You can choose when the position is requested:
rearview mirrors, and steering wheel are stored
for the remote key currently in use.
You can choose when the position is requested:
>
Request when unlocking vehicle
>
Request when opening driver's door
iDrive, for explanation of principle, refer to
page
page
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Vehicle settings" and press the
controller.
controller.
4.
Select "Door locks" and press the control-
ler.
ler.
5.
Select "Central locking" and press the con-
troller.
troller.
6.
Select "Last seat pos." and press the con-
troller.
troller.
7.
Select "After unlocking" or "After door
opened".
opened".
8.
Press the controller.
To cancel the request:
Select "Deactivated" and press the controller.
Select "Deactivated" and press the controller.
When using this feature, always make
sure that the footwell behind the driver's
sure that the footwell behind the driver's
seat is empty and unobstructed. If you fail to do
so, any persons or objects behind the seat
could be injured or damaged by a rearward
movement of the seat.
so, any persons or objects behind the seat
could be injured or damaged by a rearward
movement of the seat.
<
Front head restraints
A correctly adjusted head restraint reduces the
risk of injury to cervical vertebrae in an accident.
risk of injury to cervical vertebrae in an accident.
Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG