BMW 2006 M6 Coupe Manual Do Proprietário

Página de 227
Adju
stmen
ts
42
Adjust the head restraint so that its center 
is approx. at ear level. Otherwise there is 
increased danger of injury in the event of an 
accident.
<
Adjusting height
>
To raise: pull the head restraint upward.
>
To lower: slide the head restraint down-
ward.
To reach the lowest position, press the 
button, refer to arrow 
1.
<
Adjusting tilt angle
Swivel the head restraints.
Removal
1.
Pull the head restraint upward to the stop.
2.
Press the button, arrow
1, and remove the 
head restraint.
Only remove head restraint when no pas-
senger is seated in the respective seat, as 
otherwise you will be in violation of the law. 
Reinstall head restraint before passengers use 
the respective seat.
<
Installation
Insert head restraint into the sockets and 
adjust.
Getting in back
Before starting to drive, fold backrests 
back, otherwise there is the danger of 
accident due to an unexpected movement of 
the seat.
<
Releasing backrest
Pull the lever upward and fold the backrest for-
ward.
The lever is designed so that the safety belt can 
be hooked onto it. This enables you to fasten 
the safety belt more conveniently.
Safety belts
To ensure that the safety systems con-
tinue to provide optimized protection, 
please follow the adjustment instructions on 
page
.
<
Before every drive, make sure that safety belts 
are being worn at all of the occupied seats. Air-
bags complement the safety belt as an addi-
tional safety device, but they do not represent a 
substitute.
Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG