BMW 2004 X5 4.4i SAV Manual Do Proprietário

165

Overview

Controls

Maintenance

Repairs

Data

Index

Jump-starting

When your battery is discharged you
can use two jumper cables to start your
vehicle with power from the battery in a
second vehicle. You can also use the
same method to help start another
vehicle. Use only jumper cables with
fully-insulated clamp handles.

To avoid the risk of potentially
fatal injury, always avoid all con-

tact with electrical components while
the engine is running. Carefully observe
the following instructions to avoid per-
sonal injury and/or damage to one or
both vehicles.

Preparing

1. Check whether the battery of the

other vehicle has a voltage of
12 Volts and approximately the same
capacitance in Ah. This information
can be found on the battery

2. Switch off the engine of the support

vehicle

3. Switch off any electrical systems and

components in both vehicles.

Ensure that no contact exists
between the bodywork on the two

vehicles, otherwise there is a danger of
short circuits.

Connecting the jumper cables

To avoid personal injury from
sparks, always observe this

sequence when connecting jumper
cables.

On your BMW, the so-called starting-
aid terminal in the engine compartment
serves as the battery positive terminal,
also refer to engine compartment
essentials on page

142

. The symbol +

is embossed on the cover.

1. Fold up the cap of the BMW auxiliary

terminal for jump-starting, refer to
arrow

2. Connect one terminal clamp of the

positive/+ jumper cable to the posi-
tive terminal of the battery or an aux-
iliary terminal for jump-starting of the
vehicle providing starting assistance.

3. Connect the second terminal clamp

of the positive/+ jumper cable to the
positive terminal of the battery or to
an auxiliary terminal for jump-starting
of the vehicle to be started

530de325