BMW 2004 X5 4.4i SAV Manual Do Proprietário

Página de 193
94
n
Self-leveling suspension
2-axle self-leveling suspension
*
The warning lamp for the self-
leveling suspension comes on, 
or the message – SELFLEVEL 
SUSP.INACT – appears in the Check 
Control: there is a malfunction in the 
self-leveling suspension. 
Stop and inspect the vehicle. If it is 
riding significantly lower in the rear than 
in the front, or if it is sitting at an incline 
– left rear compared to right rear – con-
sult the nearest BMW Sports Activity 
Vehicle center. Drive with appropriate 
caution in the meantime. The vehicle 
has reduced ground clearance and 
driving comfort may be noticeably 
reduced. 
Even if the attitude of the vehicle is nor-
mal, you should consult the nearest 
BMW Sports Activity Vehicle center if 
the warning lamp indicates a system 
malfunction.
The concept 
Your vehicle is equipped with 2-axle 
self-leveling suspension acting on both 
the front and rear suspension. This sys-
tem combines automatic self-leveling, 
which compensates for variations in 
front-to-rear load-distribution patterns, 
with a selection feature allowing drivers 
to choose from among several ride-
height options.
You may choose from among the fol-
lowing ride heights:
>
Normal
The standard setting is intended for 
most operating conditions, including 
trailer towing
>
Off-Road
Increased level for more ground 
clearance
>
Access
Lowers vehicle for more convenient 
cargo handling or easier passenger 
entries and exits.
Changes in ride height are initiated 
either manually, using the control but-
ton, refer to page 
response to specific speeds. When the 
ride height is selected manually, the 
driver has the additional option of revis-
ing the ride-height selection by entering 
a new command during the adjustment 
process.
When the vehicle is stationary, the sys-
tem executes ride-height changes in 
both directions – up and down – when-
ever the doors are closed. The tailgate/
liftgate may be open. The system raises 
the vehicle only when the engine is run-
ning.
The system's automatic self-leveling 
feature automatically compensates for 
variations in the vehicle's load.
Frequent changes in ride height 
initiated at short intervals can 
overheat the compressor, causing the 
system to briefly suspend active opera-
tion.
<
Online Edition for Part No. 01 41 0 157 897 - © 08/03 BMW AG