Yamaha SP2060 V1 Manual Do Proprietário
SP2060 Owner’s Manual
Fore
w
o
rd
Netw
ork Settings
Ref
erences
P
anel Operation
Intr
oduction
to the SP2060
The Contr
ols
and Connector
s
40
About Preset Libraries
File name
•
pa........................ Passive mode*
•
bi ........................ Bi-amp mode
•
tri........................ Tri-amp mode
•
sub...................... Combining with a subwoofer**
•
moni ................... For a floor monitor
*
Yamaha Installation Series speakers are designed to be used without a speaker processor when Passive mode is
selected. However, using a speaker processor will improve the performance significantly.
selected. However, using a speaker processor will improve the performance significantly.
** This setting is for full-range speakers. Subwoofer settings are not included.
Subwoofer
•
“_sub” settings for 12-inch or 15-inch 3-way full-range speakers are designed for a combination with IS1118,
IS1215, or IS1218.
IS1215, or IS1218.
•
The IS1118, IS1215, and IS1218 settings are specified for a monaural subwoofer usage.
•
The full-range and subwoofer level balance varies depending on the number of speakers used, installation
conditions, and applications.
conditions, and applications.
•
If the full-range speaker baffle and subwoofer baffle are aligned, the speaker polarity will be positive and in-
phase.
Depending on the installation conditions of the subwoofers, you might achieve better results if the subwoofer
phase is inverted.
phase.
Depending on the installation conditions of the subwoofers, you might achieve better results if the subwoofer
phase is inverted.
Limiter
•
The default value of the threshold level has been specified based on the maximum analog output level of
+24dBu and amp voltage gain of 26dB (which corresponds to “ATT –6dB” if you are using a Yamaha PC
series amplifier that features a voltage gain of 32dB).
If you are not using the output levels referenced above, change the threshold level.
For example, if you are using an amplifier with a voltage gain of 30dB, lower the threshold level by 4dB.
+24dBu and amp voltage gain of 26dB (which corresponds to “ATT –6dB” if you are using a Yamaha PC
series amplifier that features a voltage gain of 32dB).
If you are not using the output levels referenced above, change the threshold level.
For example, if you are using an amplifier with a voltage gain of 30dB, lower the threshold level by 4dB.
•
Attack time and Release time are both set to “Mid.”
•
The Limiter may not completely protect the speakers. Use the Limiter if they suit your environment.
References
LIBRARY LIST
IF211264_pa_sub
IF211264_pa_sub
LIBRARY LIST
IF2112AS_bi_moni
IF2112AS_bi_moni
Model name
Drive
mode
Subwoofer usage
Model name
Drive
mode
Floor monitor