Yamaha DVD-C961 Manual Do Proprietário

Select this to disable to set [SPEAKERS].
In this setting, [SPEAKERS] is automatically 
set to the following options: 
FRONT SPEAKER/CENTER SPEAKER/
SURROUND SP: LARGE
SUBWOOFER: ON
SPEAKERS VOLUME: 0dB.
SPEAKERS DELAY: 0 MS.

You can set the sizes, volume levels and delay 
times for individual speakers.

• Select [SPEAKERS] in “AUDIO SETUP 

PAGE”.

Set the sizes for front/center/surround 
speakers.

Select this when no speakers are connected.

Select this if the connected speakers can 
reproduce low frequency signals below 120 Hz.

Select this if the connected speakers cannot 
reproduce low frequency signals below 120 Hz.

Select on or off for the subwoofer.

Select this if a subwoofer is connected.

Select this if no subwoofer is connected.

Adjust the volume level for individual 
speakers.

Control range: 

Adjust the delay time in relation to the 
listening position/distance for center and 
surround speakers.

Control range: 

• When [SPEAKER SETUP] is set to [OFF], you 

cannot select [SPEAKERS].

• When [FRONT SPEAKER] is set to [SMALL], 

[SUBWOOFER] is automatically set to [ON].

• When audio signals are output at the HDMI jack, 

[SPEAKER SETUP] is automatically set to 
[OFF].

y

• Use a longer delay time setting when the 

surround speakers are closer to the listener than 
the front speakers.

• A test tone is automatically generated to help you 

judge the sound level of each speaker.

You can convert your music CD to a higher 
sampling rate using sophisticated digital 
signal processing for better sound quality. If 
you activate the upsampling function, this unit 
automatically switches to the stereo mode.

• Select [CD UPSAMPLING] in “AUDIO 

SETUP PAGE”.

Select this to disable CD-upsampling.

Select this to convert the sampling rate of CD 
to twice that of the original.

Select this to convert the sampling rate of CD 
to four times that of the original.

Even when you select [176.4kHz (X4)], the digital 
output signals are upsampled to 88.2 kHz.