Verona Electric Range VEFSEE 244 P.. Manual Do Utilizador
7
LEVELLING THE RANGE
The range is equipped with 4 LEVELLING FEET (supplied in a separate kit) and may be
levelled by screwing or unscrewing the feet (fig. 1.8).
It is important to observe the directions of figures
It is important to observe the directions of figures
1.6, 1.7a, 1.7b.
+ 5/16"
+ 8 mm
+ 8 mm
+ 5/16"
+ 8 mm
+ 8 mm
0 mm
0"
0"
+ 11/16"
+ 17.5 mm
+ 17.5 mm
Fig. 1.6
Fig. 1.7a
Fig. 1.7b
Fig. 1.8
ANTI-TIP STABILITY DEVICE INSTALLATION INSTRUCTIONS
1. The anti-tip bracket has to be attached as shown on figure below (only rear right
side), it has to be fixed on the floor and on the rear wall by no. 4 (four) suitable screws
(not supplied).
2. After fixing the anti-tip bracket, slide range into place. Be sure the rear right foot
slides under the anti-tip bracket attached.
Supplied with the range
in a separate kit
Supplied with the range
in a separate kit
YOU MUST USE STABILITY
ANTI TIP BRACKET TO
PREVENT UNIT FROM
TIPPING.
ANTI TIP BRACKET TO
PREVENT UNIT FROM
TIPPING.
=
=
(223 mm)
8" 25/32
Dotted line showing the position
of the range when installed
ANTI-TIP STABILITY
DEVICE FIXING
Rear right
feet of range
Fig. 1.9
Anti-tip stability
device