Sanyo CLT-D6614 Manual Do Utilizador



Plug the AC adapter into the POWER

DC 6V jack on the back of the charger. 

Plug the other end into a standard

120V AC wall outlet.

CAUTION:.Use only the SANYO AC adapter that is supplied with this phone. 

Using another AC adapter may damage the phone. 

 

 

 

 

The handset uses 1 x NiMH 650 mAh 3.6V (AAA) rechargeable battery pack. 

The removable battery pack is already pre-installed in the handset for you.
NOTE: Before using the handset and to prolong battery life, place the handset in

the base handset cradle and charge for at least 15 hours.  

 

 

WARNING: There is a risk of explosion if battery pack is replaced with the  

incorrect battery pack type.  Dispose of the used battery pack according to    

the instructions.  

 

1.  Pull the battery contact tab out slowly and remove as shown.
2.  Place the handset in the cradle of the base unit.
3.  

The battery icon on the display will

  flash and the base indicator light will turn on to  

  indicate the handset is charging.
4.  Charge battery pack for at least 15 hours prior to  

  first use.
5.  When the battery is fully charged, the battery icon  
  will stop flashing and  

 will appear.