Sanyo CLT-D6614 Manual Do Utilizador



Once the handset battery is fully charged,

connect the telephone line cord to the

THE LINE jack on the back of the base. Plug 

the other end into a telephone outlet.

The battery icon indicates the battery status:  

1.  If the battery power is low, and the phone is in TALK mode,  a warning tone  

  will sound from the handset and ' LOW BATTERY ' will appear on the screen.
2.  If the battery is low and the phone is in STANDBY mode, ' LOW BATTERY '  

  will appear on the screen. 
Removing.and.replacing.handset.battery.pack
After years of use, all NiMH rechargeable batteries loose the ability to hold a full

charge and may need to be replaced. The handset uses 1 NiMH 650 mAh 3.6V 

(AAA) rechargeable battery pack. Only replace with an approved battery pack 

available through SANYO. Contact the SANYO Customer Service Center at 

1-800-263-2244 to order.
WARNING:There is a risk of explosion if battery pack is replaced with an

incorrect type. Dispose of used battery pack according to your local waste 

management guidelines.
To.install.a.replacement.handset.battery.pack:
1.  Remove the battery door cover on the telephone handset.
2.  Insert the battery pack according to polarity engraved as shown.
3.  Slide the cover back on so that it clicks firmly into place.

-

+

-