ONKYO CHAD Manual Do Proprietário
20
ChadEdit User Guide
How do I change the RF Settings?
The USR-5RF can be set to transmit radio frequency (RF) signals, which allows you to operate your devices
inside closets or in an adjacent room. To receive these RF signals and convert them to infrared signals, you will
need an RF Receiver (RFR-5 : optional).
inside closets or in an adjacent room. To receive these RF signals and convert them to infrared signals, you will
need an RF Receiver (RFR-5 : optional).
In the RF settings you can set Extender IDs and Channels. Both have to be identical to the ID- and CH-dials on
the RF Receiver(s). Refer to the RF Receiver User Manual for more details.
the RF Receiver(s). Refer to the RF Receiver User Manual for more details.
Note:
The RF settings can also be set on the USR-5RF. Refer to the USR-5RF User
Manual for more details. The RF transmission feature is not available on the
USR-5.
The RF settings can also be set on the USR-5RF. Refer to the USR-5RF User
Manual for more details. The RF transmission feature is not available on the
USR-5.
Defining an Extender ID
1. Open the Device Properties or Macro Group Properties.
2. Select the RF tab.
3. Select an Extender ID.
Make sure that this ID matches with the ID on the RF Receiver.
4. Click OK to accept the properties.
-or-
Click Cancel to return without changing the properties.
Defining the RF Channel
1. Open the USR-5 System Properties.
2. Select the RF tab.
3. Select an RF Channel.
Make sure the RF Channel matches with the CH on the RF Receiver.
4. Click OK to accept the properties.
-or-
Click Cancel to return without changing the properties.