Freescale Semiconductor Demonstration Board DEMO9S08AC60E Manual Do Utilizador
DEMO9S08AC60E User’s Guide, Rev. 0.1
12
Freescale Semiconductor
1.5 References
The following reference documents are included on the enclosed documentation
CD:
CD:
•
DEMO9S08AC60E_QS.pdf -- Quick Start Guide
•
SPF-20805.pdf -- Schematic
•
DEMO9S08AC60E_UG.pdf -- User’s Guide (this document)
1.6 Getting Started
To get started quickly, please refer to the DEMO9S08AC60E Quick Start
Guide. This guide will walk you through connecting your DEMO9S08AC60E
to your PC, running a test program, and installing CodeWarrior Development
Studio.
Guide. This guide will walk you through connecting your DEMO9S08AC60E
to your PC, running a test program, and installing CodeWarrior Development
Studio.
1.7 Memory Map
The table below shows the MC9S08AC60 memory map. Accessing reserved
memory locations will produce unpredictable results. Accessing
unimplemented locations will produce an illegal-address reset.
memory locations will produce unpredictable results. Accessing
unimplemented locations will produce an illegal-address reset.
Table 1-1 MC9S08AC60 Memory Map
$0000 - $006F
Direct Page Registers
112 Bytes
$0070 - $086F
RAM
2048 Bytes
$0870 - $17FF
Flash
3984 Bytes
$1800 - $185F
High Page Registers
96 Bytes
$1860 - $FFFF
Flash
59,296 Bytes
1.8 Development Support
Application development and debug for the MC9S08AC60 is supported
through the on-board USB - BDM interface (J33). There is also a 6 pin stand
alone BDM interface available (J32). This header is non-populated in the
default configuration and can be installed by the user if needed.
through the on-board USB - BDM interface (J33). There is also a 6 pin stand
alone BDM interface available (J32). This header is non-populated in the
default configuration and can be installed by the user if needed.