Motorola USBW 100 Manual Do Utilizador

Creating and Managing Network Profiles 

IP Subnet 
Specify possible IP addresses that may be assigned to your Ethernet 
interface when you are connected to this network. To specify a range of 
addresses, enter only the beginning of the IP address. For example: 

172 

The profile will be used if the Ethernet interface is assigned 
any IP address that begins with 172 

172.77 

The profile will be used if the Ethernet interface is assigned 
any IP address that begins with 172.77 

172.77.64 

The profile will be used if the Ethernet interface is assigned 
any IP address that begins with 172.77.64 

172.77.64.5 

The profile will be used only if the Ethernet interface is 
assigned 172.77.64.5 

NT Domain 
Specify the Windows NT domain that you will belong to when attached to 
this network. 

Must Match all Associations 
When this box is checked, a network you are connecting to must match 
ALL of the values entered above in order to use this profile. 
When this box is NOT checked, only one matching value must be found.  

This window contains the security settings for WiFi Network Profiles. 
Follow these steps to configure WiFi network security. 
In the 

 field, enter the broadcast name of the network profile. Note 

that the name entered here must match the SSID (Service Set Identifier) 
used by the network exactly. 

If the network you are configuring is a closed network, check 

. 

If the network whose profile you are configuring does not use WEP or WPA 
encryption, no further security configuration is necessary, the