Motorola USBW 100 Manual Do Utilizador

Página de 55
Creating and Managing Network Profiles 
Enable Application Launcher 
If this box is checked, the Motorola Connection Manager software will 
launch the applications listed on the App Launcher tab of the Settings 
window whenever it establishes a connection to the network whose profile 
you are configuring. 
If this box is not checked, the specified applications will not be launched. 
Disable IE's Manual Proxy Settings... 
If you normally connect to the Internet through a proxy server (this is 
common on corporate LANs), you may experience difficulty connecting to 
the Internet with Internet Explorer when you are traveling. This is because 
Internet Explorer is trying to connect through a proxy server that is on your 
home network rather than on the network to which you are connected. 
If this is the case, you may wish to disable Internet Explorer's proxy 
settings while you are connected to other networks. Check this box to 
disable proxy settings while you are connected using this profile.  
Launch Browser Window on Connect 
Check this box to automatically launch your browser each time you connect 
to this network. If you want the browser to start at a particular web page 
each time you connect to this network, enter the address of the desired web 
page in the box below. 
Profile Properties: IP 
The IP Settings page allows you to configure the Internet Protocol (IP) 
addressing to be used with this Profile. You will not need to alter these 
values unless specifically instructed to by your administrator. 
Profile IP Address 
The top group of settings specifies the IP address that your system will use 
when connected to this network. The default selection, 
Obtain IP address 
automatically,
 instructs the Motorola Connection Manager to ask the 
network to assign it an appropriate address each time it connects. This is 
the correct setting for most network profiles. 
If the network does not support automatic address assignment, you can 
enter appropriate values manually by clicking 
Use the following IP 
address.
 Contact the administrator of the network whose profile you are 
configuring to obtain appropriate values for these fields. 
                                                                                                                           USBw 100 
38                                                                                                                                      MAR 2009