Midland Radio Camcorder XTC-200 Manual Do Utilizador

4

www.midlandusa.com

1. Move the RECORD switch forward.  This turns the camera on.

2. The battery indicator will light from red to green.  The Micro SD card 

indicator will light green.  The record indictor will begin flashing 

red after 8 seconds.  This indicates the camera is capturing 

video.

3. To stop recording, move the RECORD switch back to the 

off position.

Note: The camera will continue recording for 3 seconds after 

toggling the switch to the off position.

512 MB

6.5 Minutes

10 Minutes

1 GB

13 Minutes

20 Minutes

2 GB

26 Minutes

40 Minutes

4 GB

52 Minutes

80 Minutes

8 GB

104 Minutes

160 Minutes

16 GB

208 Minutes

320 Minutes

32 GB

416 Minutes

640 Minutes

Note: The camera automatically splits the video into 2 GB segments.

1. To insert the battery, push down the battery door latch on the right side of 

the camera.  Door will release.  Push forward to remove.

2. Install Lithium-Ion battery.

3. Return battery door and click into place.

1. Open and fold down the back rubber cover.
2. Insert Micro SD card into slot observing proper direction (shown below).

3. Return rubber flap into place.

Solid Green

Indicates full battery life

Blinking Green

Battery is charging

Solid Red

Indicates half battery life

Blinking Red*

Indicates low battery life

No Light

Battery is dead

*Note: When the red battery LED begins blinking, be prepared 

to charge the battery because the camera will stop recording 

at this point.

Green

 1 GB or more available.

Orange

512 MB to 1 GB available.

Red

Below 512 MB

 available or 

no Micro SD card installed.

Flashing Red

Cannot read the card.

Flashing Green

Indicates card has been 

reformatted.