McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Manual Do Utilizador
2
Hardware Configurations
2-11
Internal Fibre Channel Switch (FCSW)
Internal Fibre Channel Switch (FCSW)
The FCSW application resides in the data path stack between the
Fibre Channel device driver (FCCNT) and the WAN network
provider. This allows the FCSW to operate as a switch, determining
which destination to forward a frame to. The FCSW passes Fibre
Channel frames to/from the FCCNT driver. For Fibre Channel frames
destined to the switch itself or one of its services, the frame is routed
to the appropriate entity and the proper response is given.
Fibre Channel device driver (FCCNT) and the WAN network
provider. This allows the FCSW to operate as a switch, determining
which destination to forward a frame to. The FCSW passes Fibre
Channel frames to/from the FCCNT driver. For Fibre Channel frames
destined to the switch itself or one of its services, the frame is routed
to the appropriate entity and the proper response is given.
Batching is only allowed if the destination id is not the same as the
source id and all the frames in the batch are for the same destination
id. At this time, two ports are supported by the FCSW.
source id and all the frames in the batch are for the same destination
id. At this time, two ports are supported by the FCSW.
See
, for information about
the FCSW application user interface commands through which
information and status can be obtained.
information and status can be obtained.
Hardware Components
The UltraNet Edge 3000 consists of a chassis and the components
listed in Table 2-8, these components are illustrated in Figure 2-2 and
Figure 2-3.
listed in Table 2-8, these components are illustrated in Figure 2-2 and
Figure 2-3.
Table 2-8
Hardware Components
Description
I/O cards (4 maximum)
•
Fibre Channel (FCBB
or FCXL2 for
FC/SCSI
Tape Pipelining)
•
Ethernet 10/100
•
Gigabit Ethernet
•
OC-3 ATM
Fan assemblies (4)
Power supply
Redundant power supply