Monogram ZSC120XJSS Instrução De Instalação

NOTE: Appearance will vary by model.

#2 Phillips screwdriver

‡

 

Hand-held drill

 

High speed drill bit, 3/32s diameter

3/8s slot-head screwdriver

Level

Saw

2 x 4 or 2 x 2 lumber for installing runners or 3/8s 

plywood for floor (if required)

Wood screws or other hardware for installing 

runner or shelf to support oven (if required)

Safety glasses or goggles

6 screws (3 required, 3 extra)

5 color-matched screws (4 required, 1 extra)

Bottom trim (2)

‡  These ovens may be installed directly into a 30s wide 

oven cabinet.

‡  Cutout dimensions are NOT the same for installation 

with or without an accessory storage drawer.  

Make sure to use the correct cutout when preparing 

the opening.

   NOTE: ZSC1202 models CANNOT be installed with 

an accessory storage drawer. See Installation 

Preparation Without an Accessory Storage Drawer  

for this model.

‡$OORZIRUFOHDUDQFHWRDGMDFHQWFRUQHUVZDOOV

drawers, etc.

The oven must be securely installed in a cabinet 

that is firmly attached to the house structure. 

Weight on the oven door could cause the oven to tip 

and result in injury. Never allow anyone to climb, sit, 

stand or hang on the oven door.
If installing the drawer accessory, the drawer must 

be assembled to the oven prior to installation into 

the cabinet. See the Accessory Storage Drawer 

Assembly Instructions.

21-1/2s

1s

13s

19s

29-3/4s

1-3/5s

1-1/10s