Monogram ZSC120XJSS Instrução De Instalação

NOTE: Additional clearances between the cutouts 

may be required. Check to be sure the oven supports 

above the Warming Drawer location do not obstruct 

the required interior depth and height. See Warming 

Drawer installation instructions for details.

30s

23-1/2s

25-1/4s

17-1/2s

2s Min.  

(3s Recommended)

Per Warming 

Drawer 

Requirement

Construct  

Solid Bottom  

Min. 3/8s 

Plywood 

Supported  

by 2 x 4 or 2 x 

2 Runners all  

Four Sides

The Advantium 120V can be installed in 

combination with other GE/Monogram appliances. 

Always follow each product’s Installation 

Instructions to complete the installation.

Order a 30s wide single oven cabinet or cut the 

opening in a wall to the dimensions shown.

‡$OORZs case trim overlap on the sides,  

1-1/16s overlap on the top and 7/8s overlap  

on the bottom of the opening for all models.  

‡2YHQRYHUODSVZLOOFRQFHDOFXWHGJHVRQDOOVLGHV

of the opening.

When installed over a single oven or a warming 

drawer, allow at least 2s between the two 

openings. This separation will provide clearance 

for bottom overlap of the Advantium 120V and the 

other appliance overlaps.
Construct a solid oven floor of 3/8s min. thick plywood 

supported by 2 x 4  or 2 x 2 runners on all sides.
‡7KHVXSSRUWPXVWEHOHYHODQGULJLGO\PRXQWHG

flush with the bottom edge of the cutout.

30s

23-1/2s

25-1/4s

17-1/2s

Construct  

Base  

Min. 3/8s 

Plywood 

Supported  

by 2 x 4 or  

2 x 2 Runners 

all Four Sides