Blomberg DHP24412W Manual Do Proprietário

21 / 28  EN

Dryer / User Manual

If you want to add or remove laundry after the drying 

program starts:

1

.

  Press the Start/Pause button to take the machine 

into Stand-by mode. Drying operation stops.

2.   Open the loading door, add or remove laundry and 

close the loading door.

3.   Start the program by pressing the Start / Pause 

button.

C

The laundry adding made after the drying 

operation started may cause the dried 

laundry inside the machine to mix with 

the wet laundry and the laundry to remain 

damp after the operation ends..

C

Laundry adding and removing can be 

repeated as much as desired during 

drying operation.

But this process would continuously 

interrupt the drying operation, and so 

would cause the program duration 

to lengthen and increase energy 

consumption. Thus, it is recommended to 

add laundry before the program starts.

C

If a new program is selected by changing 

the position of the program selection knob 

while your machine is in stand-by mode, 

the running program ends.
Do not contact the inner surface of the 

drum when adding or removing laundry 

during a continuing program. The drum 

surface is hot.

If you want to cancel the program and end the drying 

operation for any reason after the machine starts 

running, press the On/Off button.

A

As it will be extremely hot inside the 

machine when you cancel the program 

while the machine is in operation; run the 

ventilation program to cool it down.

Start the program by pressing the Start / Pause button.

Start/Pause led and the Drying led light up, indicating 

the program started. The “:” sign in the middle of the 

remaining duration starts to blink.

The machine features a child lock which prevents 

the machine program flow from being affected when 

buttons are pressed during operation.

When the Child Lock is active, all buttons except for the 

On/Off button are deactivated.

To activate the child lock, press the Sound Notification 

button and End Duration button simultaneously for 3 

seconds.

Te child lock should be deactivated to be able to start 

a new program after the current program ends or to 

be able to interfere with the current program. Keep the 

same buttons pressed for 3 seconds again to deactivate 

the child lock.

C

The lock led on the screen lights up when 

the Child Lock is activated.

C

Child Lock deactivates when the machine 

is turned off and on again using the On/

Off button.

A warning sound is heard when any button is pressed 

(except for On/Off button) or the Program Selection knob 

is turned while the child lock is active.

After the machine starts running, you can change 

the program you selected to dry your laundry with a 

different program.

1.  For example, to select Extra Dry program instead 

of the Iron Dryness, stop the program by pressing 

the Start / Pause button.

2.   Turn the Program Selection knob to select the 

Extra Dry program.

3.   Start the program by pressing the Start / Pause 

button.