Blomberg DHP24412W Manual Do Proprietário

23 / 28  EN

Dryer / User Manual

Service life of product extends and frequently 

experienced problems will be reduced if it is cleaned at 

regular intervals.

Lint and fiber released from the laundry to the air during 

the drying cycle are collected in the Lint Filter. 

C

Such fiber and lint are generally formed 

during wearing and washing.

A

Always clean the lint filter and the inner 

surfaces of the loading door after each 

drying process.

C

You can clean the lint filter housing with a 

vacuum cleaner.

To clean the lint filter:

• 

Open the loading door.

• 

Remove the lint filter by pulling it up and open the 

lint filter.

• 

Clean lint, fiber, and cotton raveling by hand or with 

a soft piece of cloth.

• 

Close the lint filter and place it back into its 

housing.

• 

A layer can build up on the filter pores that can 

cause clogging of the filter after using the dryer 

for a while. Wash the lint filter with warm water 

to remove the layer that builds up on the lint 

filter surface. Dry the lint filter completely before 

reinstalling it.

• 

Clean the entire inner surface of the loading door 

and loading door gasket with a soft damp cloth.

There are dampness sensors in the dryer that detect 

whether the laundry is dry or not.

To clean the sensors:

• 

Open the loading doorof the dryer.

• 

Allow the machine to cool down if it is still hot due 

to the drying process.

• 

Wipe the metal surfaces of the sensor with a soft 

cloth, dampened with vinegar and dry them.

C

Clean metal surfaces of the sensors 4 

times a year.

C

Do not use metal tools when cleaning 

metal surfaces of the sensors.