Monogram ZSC1001JSS Instrução De Instalação

NOTE: Additional clearances between the cutouts 

may be required. Check to be sure the oven supports 

above the Warming Drawer location does not 

obstruct the required interior depth and height. See 

Warming Drawer installation instructions for details.

27” or 30”

23-1/2”

25-1/8”

17-1/2”

9-1/4”

36-3/4”

Min.

2” Min.

Install 2 x 

4 or 2 x 2 

Runners 

or Solid 

Bottom. 

Must 

Support 100 

lbs.

Construct  

Solid Bottom  

Min. 3/8” 

Plywood 

Supported  

by 2 x 4 or  

1 x 2 Runners 

all Four Sides

The Advantium 120 can be installed in combination 

with other GE/Monogram appliances. Always follow 

each product’s Installation Instructions to complete 

the installation.

Order a 27” or 30” wide single oven cabinet or cut 

the opening in a wall to the dimensions shown.

‡$OZD\VPDLQWDLQµPLQLPXPKHLJKWIURP

the floor to the cutout in any single or combined 

installation.

‡$OORZµFDVHWULPRYHUODSDWWKHWRSDQG

7/8” overlap on the bottom and each side of the 

opening.

‡2YHQRYHUODSVZLOOFRQFHDOFXWHGJHVRQDOOVLGHV

of the opening.

When installed over a single oven or a warming 

drawer, allow at least 2” between the two openings. 

This separation will provide clearance for bottom 

overlap of the Advantium 120 and the other 

appliance overlaps.

Construct a solid oven floor of 3/8” min. thick 

plywood supported by 2 x 4 runners on all sides.
‡7KHVXSSRUWPXVWEHOHYHODQGULJLGO\PRXQWHG

flush with the bottom edge of the cutout.

27” or 30”

23-1/2”

25-1/8”

17-1/2”

Construct  

Base  

Min. 3/8” 

Plywood 

Supported  

by 2 x 4  

or 1 x 2 

Runners all 

Four Sides

36-3/4”

Min.