Monogram ZSC1001JSS Instrução De Instalação
7
Installation Preparation
PREPARE THE OPENING
(CONT.)
Installation over a GE/Monogram Oven and
Warming Drawer:
NOTE: Additional clearances between the cutouts
may be required. Check to be sure the oven
supports above the Warming Drawer location does
not obstruct the required interior depth and height.
See Warming Drawer installation instructions for
details.
CAUTION: For personal safety, the mounting surface
must be capable of supporting the cabinet load, in
addition to the added weight of this approximate 75
pound product, plus, additional oven loads of up to
50 pounds or a total weight of 125 pounds.
MISE EN GARDE : Pour votre sécurité personnelle,
la surface de montage doit être capable de
supporter le poids du cabinet, en plus du poids
supplémentaire du produit, soit 34 kg, en plus du
poids supplémentaire du four pouvant aller jusqu’à
22,7 kg, ou un poids total de 56,7 kg.
REMOVE THE PACKAGING
/LIWWKHRYHQRXWRIWKHFDUWRQ
5HPRYHDOOSDFNLQJPDWHULDODQGWDSH
2SHQWKHGRRUDQGUHPRYHSDUWVER[
/RFDWHSDUWVSDFNDJHFRQWDLQLQJPRXQWLQJVFUHZV
5HPRYHDOOSDFNLQJPDWHULDODQGWDSH
2SHQWKHGRRUDQGUHPRYHSDUWVER[
/RFDWHSDUWVSDFNDJHFRQWDLQLQJPRXQWLQJVFUHZV
Construct
Solid Bottom
Min. 3/8”
Plywood
Supported by
2 x 4 or 1 x 2
Runners all
Four Sides
27” or 30”
23-1/2”
25-1/8”
17-1/2”
2” Min.
Per Oven
Requirement
45-1/4”
9-1/4”
2” Min.
PREPARE THE OPENING
(CONT.)
Installation over a GE/Monogram Oven:
* If you are replacing a GE/Monogram electric
double oven with the combined installation of
an Advantium 120 and a single oven, use the
dimensions shown. The middle rail separating the
two openings may need to be larger than the 2”
minimum shown.
27” or 30”
23-1/2”
25-1/8”
17-1/2”
2” Min.
45-1/4”
Min.
Construct Solid
Bottom Min.
3/8” Plywood
Supported by
2 x 4 or 1 x 2
Runners all
Four Sides
Per Oven
Requirement