Frigidaire FFQG5000QW Instrução De Instalação

6

Use only 4 inch (102 mm) diameter (minimum) rigid 

or fl exible metal duct and approved vent hood which 

has a swing-out damper(s) that open when the dryer 

is in operation. When the dryer stops, the dampers 

automatically close to prevent drafts and the entrance 

of insects and rodents. To avoid restricting the outlet, 

maintain a minimum of 12 inches (30.5 cm) clearance 

between the vent hood and the ground or any other 

obstruction.

If your present system is made up of plastic duct or 

metal foil duct, replace it with a rigid or semi-rigid metal 

duct. Also, ensure the present duct is free of any lint prior 

to installing dryer duct.

Failure to follow these instructions can create excessive 

drying times and fi re hazards.

Do not install a clothes dryer with fl exible plastic or 

metal foil venting materials. Flexible venting materials 

are known to collapse, be easily crushed and trap lint. 

These conditions will obstruct clothes dryer airfl ow and 

increase the risk of fi re.