Frigidaire FHWC3025MB Manual Do Proprietário

After installation,

the unit doesn’t 

work.

1. The power line and the cable locking  

connector is not connecting properly.

1. Check the power connection with the unit is

connected properly.

2. The wires from the switches are disconnected 

or loose.

2. Make sure the wires on the switches are

connected properly.

Light works,

but motor is not

turning.

1. The motor is defective, possible seized. 

1. Change the motor.

2. The thermally protected system detects if the

motor is too hot to operate and shuts the motor

down.

2. The motor will function properly after the

thermally protected system cool down.

4. The motor wire is not connected.

4. Make sure the motor wire is plugged into the

molex connector.

The unit is

vibrating.

1. The motor is not secure in place.

1. Tighten the motor in place.

2. Damaged blower wheel.

2. Change the blower.

3. The hood is not secured in place.

3. Check the installation of the hood.

The motor is

working, but the

lights are not.

1. Defective bulb. 

1. Change the bulb.

2. The light bulb is loose.

2. Tighten the light bulb.

3. The wires on the light switch are loose.

3. Make sure the wires on light switch are

connected properly.

The hood is

not venting out

properly.

1. The hood might be hanging to high from the

cook top.

1. Adjust the distance between the cook top and

the bottom of the hood within 24” (61 cm) and 

32” (76.2 cm) range.

2. The wind from the opened windows or opened

doors in the surrounding area are affecting the

ventilation of the hood.

2. Close all the windows and doors to eliminate

the outside wind flow.

3. Blockage in the duct opening or duct work. 

3. Remove all the blocking from the duct work or

duct opening.

4. The direction of duct opening is against the 

wind.

4. Adjust the duct opening direction.

5. Using the wrong size of ducting.

5. Change the ducting to correct size.

Metal filter is

vibrating.

1. Grease filter is loose.

1. Make sure filter retainer still works.

2. Filter retainer does not freely move

2. Replace grease filter.