Perlick 15" Signature Series Clear Ice Maker - Solid Stainless Door - Right Hinge Guia De Utilização

6. INSTALLER FINAL CHECK LIST

1) Is the Ice Maker level?

2) Is the Ice Maker in a site where the ambient temperature is within 45°F (7°C) to 100°F

(38°C) and the water temperature within 45°F (7°C) to 95°F (35°C) all year around?

3) Have all shipping tape(s), string and packing been removed from the Ice Maker?

4) Are all components, fasteners and thumbscrews securely in place?

5) Have all electrical and piping connections been made?

6) Has the power supply voltage been tested or checked against the nameplate rating?

Has a proper earth been installed to the Ice Maker?

7) Are the Water Supply Line Shut-off Valve and Drain Valve installed? Has the water supply

pressure been checked to ensure a minimum of 10 PSIG (0.7 bar) and a maximum of
113 PSIG (7.5 bar)?

8) Have the Compressor hold-down bolts and all refrigerant lines been checked against

vibration and possible failure?

7. START UP

* Check that shipping tape(s), string and packing are removed before starting the Ice Maker.

1) Clean inside the Storage Bin and Door.

2) Open the Water Supply Line Shut-off Valve and plug in the Ice Maker.

3) Move the Control Switch to the “ICE" position.

* The freezing cycle will start automatically.

9) Has the user been given the Instruction Manual and instructed on how to operate the

Ice Maker and the importance of periodic maintenance recommended?

10) Has the user been given the name and telephone number of the Authorized Service

Agency?