Viewsonic PJ510 Manual Do Utilizador

Select a Noise Reduction Mode:
HIGH (S) Q (T) MIDDLE (S) Q (T) LOW

• This function performs only at a VIDEO input or a S-VIDEO input. At a VIDEO input of NTSC 3.58, 

this function performs only when the TURN OFF is selected under the 3D-YCS.

• When the HIGH, the MIDDLE or the LOW is selected, the noise on screen is reduced according to 

each mode.

• When this function is excessive, it may cause a certain degradation of the picture.

Select the Progressive Mode:
TV (S) Q (T) FILM (S) Q (T) TURN OFF

• This function performs only at an interlaced signal of a VIDEO input, a S-VIDEO input or a 

COMPONENT VIDEO input of 525i or 625i signal. The FILM mode is adaptable to the 3-2 Pull-
Down system to the conversion.

• When the TV or FILM is selected, the resolution is raised. 
• This function may cause a certain degradation of the picture. In such a case, please select  TURN 

OFF.

Display the Information: 
Pressing the (X) or the ENTER button performs this function.

• Use this function when you want the information about the current input (ex. the resolution and the 

vertical frequency at a RGB input, the signal type of a video input) and setting states of the 
COMPONENT, the VIDEO and the FLAME LOCK.

Select the S2-ASPECT Mode:
TURN ON (S) Q (T) TURN OFF

• This function performs only at a S-VIDEO input.
• When the TURN ON is selected, an S2-Video signal can be identified and the optimum aspect 

ratio is automatically selected. 

• When the ASPECT button of the remote control is used or the ASPECT item of the MAIN menu is 

operated, the S2-ASPECT mode will be switched to the TURN OFF automatically.

Reset the INPUT Menu Items: 
Selecting the EXECUTE performs this function.

EXECUTE (S)  CANCEL
• The items of the INPUT menu are collectively returned to the initial setting. Note that the 

INFORMATION item is not reset.