Sharp XL-MP15H Manual Do Utilizador

8

7

6

5

4

3

2

1

XL-MP15H AUS 01-16.fm

2009June11

  

Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.

Caution:
● Do not use chemicals for cleaning (petrol, paint thinner, etc.). It

may damage the cabinet finish.

● Do not apply oil to the inside of the unit. It may cause

malfunctions.

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.

■ Cleaning the cabinet

■ Cleaning the CD pickup lens

Do not touch the laser 
pickup lens. If finger prints 
or dust accumulate on the 
pickup, clean it gently with 
a dry cotton swab.

■ General

AC 220 - 240 V ~ 50/60 Hz

Power on: 15 W
Power stand-by: 0.6 W(*)

Width: 200 mm (7-7/8") 
Height: 137 mm (5-3/8") 
Depth: 210 mm (8-1/4")

1.5 kg (3.3 lbs.)

 (*)

This power consumption value is obtained when the main unit
is in stand-by mode.

■ Amplifier

MPO: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 8 W (4 W + 4 W) (1% T.H.D.)

Speakers: 4 ohms
Headphones: 16 - 50 ohms 
(recommended: 32 ohms)

Audio In (audio signal): 
250 mV/47 k ohms

■ CD player

1 disc top loading

Non-contact, 3-beam semiconductor 
laser pickup

Multi bit D/A converter

20 - 20,000 Hz

90 dB (1 kHz)

■ Tuner

FM: 87.5 - 108 MHz
AM: 522 - 1620 KHz

Maximum station can be stored is 40
preset.

■ Speaker

1-way type speaker system
10 cm (4") Full Range

10 W

5 W

4 ohms

Width: 135 mm (5-5/16") 
Height: 160 mm (6-14/64") 
Depth: 165 mm (6-1/2")

0.87 kg (1.92 lbs.)/each