Nintendo 780332169469?TWLSKA Manual Do Utilizador

Confirm that your network environment can 
connect to the Internet.
Review the settings after Auto-Obtain IP Address 
in the connection settings.
If the Auto-Obtain IP Address setting is set to 
Don’t use, check whether the security type and
key in the connection settings match the settings 
for the access point you want to connect to.

Confirm that your network environment can 
connect to the proxy server.
Review the proxy server settings.

Review the Auto-Obtain IP Address setting  
in the connection settings.

The wireless signals may be too weak at your 
location. Try moving closer to your access point, 
and make sure there are no people, objects, or 
other obstacles between the system and the 
access point.
When connecting to an Internet hotspot for 
which a proprietary security key has been set, 
make sure you configure your connection setting.

The wireless signals may be too weak at your 
location. Try moving closer to your access point, 
and make sure there are no people, objects, or 
other obstacles between the system and the 
access point.
This might be a temporary issue, so wait a while 
and then try again. If the issue does not get 
resolved, contact Nintendo Customer Service.

No access point in range.

You must accept the user agreement.

Wireless Communications 
is currently disabled under 
System Settings.
Could not find an access 
point with the SSID that has 
been set.

Could not connect to the access 
point.

Could not connect because 
the maximum number of 
simultaneous connections to the 
access point has been exceeded.

Cannot connect to the access 
point for an unknown reason.

Could not automatically 
acquire the IP address.

Check the access point settings. The wireless 
signals may be too weak at your location.
Try moving closer to your access point, and 
make sure there are no people, objects, or other 
obstacles between the system and the access 
point.
Make sure the access point is in a usable state. 
For details, see the instruction manual for your 
access point.
Agree to the 

user agreement

.

Enable the wireless communications setting.

Check whether the SSID in the connection 
settings matches the settings for the access point 
you want to connect to.

Make sure the security key in the connection 
settings matches that of the access point.
If this error code occurs even after connections 
are allowed, the wireless signals may be too 
weak at your location.
Try moving closer to your access point, and 
make sure there are no people, objects, or other 
obstacles between the system and the access 
point. When connecting to an Internet hotspot 
for which a proprietary security key has been set, 
make sure you configure your connection setting.

The access point you tried to connect has a limit 
on the number of devices that can connect to it. 
Wait for a while and try again.

See the resolution for error codes 
051100-051299.
Reconfigure the access point settings.

Enable the DHCP server feature of your access 
point or other network device. If you cannot 
use the DHCP server feature, you will have to 
configure the IP address and other such settings 
manually.
Make sure the security type and key of the 
connection settings match the settings for the 
access point you want to connect to.

Could not connect to the 
Internet.

Could not connect to the 
proxy server.

Cannot connect because 
there is another network 
device that is set to the same 
IP address.

Could not connect to the 
Internet.

Communication error.  
You have been disconnected
from the network.