Kenwood NX-210 Manual Do Utilizador

The Scan Revert channel is the channel selected when you 

press the PTT switch to transmit during scan.  Your dealer can 

program one of the following types of Scan Revert channels:

•  Selected:  The last channel selected before scan.

•  Selected + Talkback:  Same as “Selected”, plus you can 

respond to calls on the channel at which scan is paused.

•  Priority 1/ Priority 2:  The Priority channel (either Priority  

or Priority 2) .

•  Priority 1 + Talkback/ Priority2 + Talkback:  Same as 

“Priority / Priority 2”, plus you can respond to calls on the 

channel at which scan is paused.

•  Last Called + Selected:  The last channel on which you 

receive a call.

 You can add and remove zones and/or channels/group IDs to 

and from your scan list.
1

  Select your desired zone and/or channel/group ID.

  Press the key programmed as Zone Delete/Add (to 

add/remove zones) or Scan Delete/Add (to add/remove 

channels/group IDs).

•  You can also press and hold the key programmed as Scan

 to add/remove zones.

 If the Priority channel has been set as Operator Selectable by 

your dealer, you can reprogram the Priority channels.
1

  Select your desired zone and channel/group ID.

  Press the key programmed as Priority-channel Select.

  Press 

/

 to select “NORMAL”, “PRIORITY ” (   ), 

“PRIORITY 2” (   ), or “PRIORITY &2” (   ).

  Press   to save the setting and exit.