Kenwood TK-5410 Manual Do Utilizador

VOX can be activated or deactivated by your dealer.  VOX 

operation allows you to transmit hands-free.  This feature can 

only be used if you are using a supported headset.
When operating VOX, you must set a VOX Gain level.  This 

setting allows the transceiver to recognize sound levels.  If 

the microphone is too sensitive, it will begin transmitting when 

there is noise in the background.  If it is not sensitive enough, it 

will not pick up your voice when you begin speaking.  Be sure 

to adjust the VOX Gain level to an appropriate sensitivity to 

allow smooth transmission.

1  Connect the headset to the transceiver.

•  The VOX function does not activate when a headset is not 

connected to the accessory terminal of the transceiver.

2  Press the key programmed as VOX.

•  On K2/K3/K/K/K7 model transceivers, the current VOX Gain 

level appears on the display.

3  Press the Side 2 and Side 3 keys or the D> and <C keys to 

increase or decrease the VOX Gain level.

•  The VOX Gain can be adjusted from levels  to 0.

4  While adjusting the gain level, speak into the headset 

microphone as you would while under normal operation, to 

test the sensitivity level.

•  When the microphone recognizes a sound, the LED lights 

orange.  This allows you to determine a suitable level where 

background noise will not activate VOX operation while 

speaking into the microphone will activate it.

•  The transceiver does not transmit your voice during this test 

procedure.

5  Press the Side 1 key to save the setting.