Kenwood TK-5410 Manual Do Utilizador

2

1  Connect the headset to the transceiver.

•  The VOX function does not activate when a headset is not 

connected to the accessory terminal of the transceiver.

2  Press and hold the key programmed as VOX for 2 seconds.

•  On K2/K3/K/K/K7 model transceivers, the 

 icon appears 

on the display.

3  To transmit, simply speak into the microphone.

•  The transceiver recognizes sound levels depending on the 

VOX Gain level.  If the microphone is too sensitive, it will begin 

transmitting when there is noise in the background.  If it is 

not sensitive enough, it will not pick up your voice when you 

begin speaking.  Be sure to adjust the VOX Gain level to an 

appropriate sensitivity to allow smooth transmission.

4  When you finish speaking, the transceiver automatically 

returns to receive mode.

•  Depending on the pre-programmed delay time, it may take a 

moment before returning to receive mode.  The delay time is 

present to ensure that the end of your conversation is not cut 

off when you finish speaking.

5  To turn the VOX function OFF, press and hold the VOX key 

again, for 2 seconds.

Note:
◆

  If a speaker/ microphone is connected to the transceiver while 

the VOX function is switched ON and the VOX Gain Level is 

configured to a higher, more sensitive level, louder received 

signals may cause the transceiver to start transmission.

◆

  When you operate the VOX function, you must use an optional  

KHS-BL, KHS-, KHS--BH, or KHS--OH accessory.